Westinghouse ceiling fan Cyclone brushed steel 132 cm / 52"

Item ID
1871
Producer
Westinghouse
EAN
4895105600677
Instruction manual:
Anleitung Download
Spec sheet:
Produktdatenblatt Download

Producer logo
Only 60 Pound Sterling until free shipping.
No shipping costs for orders over 60.00 £*
*Only for orders to UK.


Westinghouse ceiling fan Cyclone brushed steel 132 cm / 52"

Cyclone Ceiling Fan

The Cyclone fan made by Westinghouse has a beautiful black and silver finish. The housing with a brushed steel lacquer makes the Cyclone an appealing and useful addition to any room. This ceiling fan with reversible black blades enhances any interior. Due to the reversible nature of the blades you can choose between two looks: all black blades or black blades with silver stripes on the outer part.

The fan’s rotation speeds can be controlled on three levels by using the included pull switch. The speed levels low-medium-high allow you to match the airflow to your current requirements. For more convenience we offer a remote control kit or wall controller unit. The summer and winter modes are selected with a small manual switch located on the fan body. The summer mode provides pleasant cooling whereas the winter mode helps to recirculate heat and eliminate any cold spots on the floor.
 
Installation ceiling fan
Cyclone ceiling fans can be mounted two different ways: You can choose to flush-mount the fan without the drop rod which is ideal for low ceilings, or you install it with the included pole on standard and vaulted ceilings. Ideally, there is a 2.30 m clearance between the floor and the blades. The ceiling should be able to carry a minimum of 15.9 kg.
 

Where to apply Cyclone fans

  • Living room
  • Bedroom
  • Office
  • Restaurants
  • Hallways
  • other Indoors

Our tip:

Thanks to the black finish with silver stripes the Cyclone has a dynamic look which is a wonderful addition to sports bars and pubs. If the space is rather large, you can simply set up several fans that are spaced out evenly on the ceiling.

 

Dimensions and technical details

  • 240 Volt / 50 Hertz
  • Diameter: 132 cm / 52", for spaces with up to 25 m²
  • Blade colour: black / black with silver stripes (reversible)
  • Housing colour: brushed steel
  • Blade pitch: 11°
  • Revolutions per minute: 180 / 130 / 80 (three rotation speeds)
  • Power consumption (Watt): 58 / 40 / 26
  • Dimensions ceiling to blades: 27 cm / 10.6" (20 cm / 7.8" when mounted without drop rod)
  • Dimensions ceiling to bottom of switch housing: 33 cm / 13" (26 cm / 10.2" when mounted without drop rod)
  • Weight: ca. 7.0 kg
  • Winter and summer mode controlled with slide switch on the housing
  • Fan controlled with pull switch
  • Remote controls or wall switches can be added (optional)
  • Extremely smooth and quiet operating, no audible motor sounds
  • 10 years limited warranty for the motor
.

Accessory

Ceiling fan extension drop rod Brushed Steel in various lengths

incl. VAT excl. shipping

Decorative Ceiling and Wall Medallion Classic Smooth

incl. VAT excl. shipping

Suspension kit mounting brackets for suspended ceilings in various sizes

incl. VAT excl. shipping

Wall control unit for Westinghouse ceiling fans

incl. VAT excl. shipping

Ceiling fan extension rod brushed chrome in various lengths

incl. VAT excl. shipping

 
.

Free shipping


  • Free shipping to the UK on orders over £ 60.00! For orders under £ 60.00 shipping costs of
    £ 15.00 apply.
  • Shipping costs

Socialven



© Copyright 2019 Creoven. All rights reserved.

Siegel
Nach oben