AireRyder ceiling fan Cyrus White without Light

max. 50 W power consumption

Ø 107cm / 42"

housing colour white

3 blades, white / pine

pull cord operation

Item number FN44477N

immediately ready for dispatch, delivery time 2 - 3 days

* Incl. VAT excl. Shipping


Dimensions and technical data

  • 230 Volt / 50 Hz
  • Diameter: 107cm / 42"
  • Housing colour: white
  • Blade colour: white / pine (MDF, reversible)
  • Blade pitch: 15°
  • Revolutions per minute: 200 / 140 / 100
  • Motor wattage: 50 / 30 / 15 W
  • Max. airflow: 100 m3/min / 3531 CFM
  • Ceiling to blades: 20.3cm / 7.99" 
  • Ceiling to lamp housing: 38.7cm / 15.24" 
  • Drop rod can be cut to size
  • Max. ceiling inclination: 23°
  • Manual reversing switch for summer and winter mode (forward and reverse function)
  • Includes optional 3 x GU10 light kit (install with or without light kit)
  • Pull cord operation: 3 fan speeds / off (light on / off)
  • Remote control or wall control can be added (sold separately)
  • Weight: ca. 5.1kg

Details bulbs

  • The light is compatible with bulbs rated energy classes: E to A++!

The modern AireRyder Cyrus ceiling fan is supplied with reversible blades in white and pine. Apply the Cyrus to rooms with about 15 m² space. Its 107 cm diameter makes the fan perfect for medium-sized and small rooms. Three rotation speeds between 100 and 200 revolutions per minute are controlled with integrated pull cords. The spinning direction (forward / reverse) is determined by a little switch located on the motor housing. Select summer mode to provide a cool breeze on hot days. Flick the switch to winter mode and reduce your heating bill by up to 30%. During winter mode the fan spins in reverse and forces heat down from the ceiling to remove cold spots on the floor.

Our Cyrus model can be installed with and without a light kit. All required parts for either type of installation is included in the delivery. When fitted without lights, a cap is added to the bottom of the switch housing to hide wiring. Alternatively, there is a light kit with three adjustable spots. The fan and light functions are controlled with two independent pull cords. You can use any type of bulb you want as long as they have a GU10 base. You can also add a remote kit or wall controller if you wish. The suitable models are shown in our accessory section.

tab placehold


Similar products